Specs
Gallery
Videos
SPECIFICATIONS
Item / Model VMT-1000+Y
Request a Quote
Capacities
Maximum Turning Diameter 39.4″
Maximum Swing Diameter 39.4″
Maximum Cross Travel (X-Axis) 44.09” (-1.97” / + 42.12”)
Maximum Longitudinal Travel (Z-Axis) 44.68″
Maximum Off-Center Travel (Y-Axis) 29.5” (+/- 14.76” from center)
Distance from Milling Spindle Nose to Chuck Face (Vertical) 37.87″
Distance of Milling Spindle Face to Chuck Centerline (Horizontal) 33.35″
Spindle
Spindle Motor (Fanuc P Series) 30 HP Double Wound (more torque at lover RPM than a 50HP single wound motor)
Spindle Drive 2 Speed ZF Planetary Gearbox
Spindle Nose A2-11
Spindle RPM 0-1500
Spindle Bearing Diameter 7.87″
Spindle Inside Taper M. T. 7
Hydraulic Chuck 24″ 3-Jaw
ATC
Tool Positions 24 (40/60 opt.)
ATC Type Arm-Type with Tool Chain
Tool Mounting #50 Taper
Maximum Tool Diameter with Adjacent Tools 5″
Maximum Tool Diameter without Adjacent Tools 10″
Maximum Tool Length 13.8″
Maximum Tool Weight 55 lbs.
Tool Change Time 15-20 Seconds
Ballscrews and Axis Motors
Z-Axis Ballscrew Diameter 50mm (1.96″) x 16mm Pitch
X-Axis Ballscrew Diameter 50mm (1.96″) x 10mm Pitch
Y-Axis Ballscrew Diameter 50mm (1.96″) x 12mm Pitch
Ballscrew Type Class 3 Double Nut
Ballscrew Mounting Type Pre-loaded, Double Anchored
X-Z-Y-C Servo Motor HP X=8HP / Z=12HP / Y=5.2HP / C=4HP
C-Axis and B-Axis Milling Spindle
Milling Spindle Motor 20 HP
Spindle RPM 3,500
Tool Shank Type BT-50 (CAT-50 opt.)
Spindle Torque 178 ft./lbs. at 437 RPM
B-Axis Head Rotation 0-90° (2 positions) 5° or 1° Index Opt.
C-Axis Indexing .001°
C-Axis Rapid Speed 3.4 RPM
C-Axis Positioning Accuracy +/- 7.5 Arc Seconds
C-Axis Repeatability +/- 5 Arc Seconds
Feeds
Rapid Traverse Rate X, Y, Z 394, 394, 394 IPM
Cutting Feed Rate 0.01 – 157 IPM
Positioning Accuracy +/- .0003″ Full Stroke
Repeatability +/- .0002″
General
Coolant Tank Capacity 100 Gallons
Coolant Pump Motor 4 HP
Machine Weight 48,400 lbs.
Floor Space 220″ x 228″ x 160″
Machine Power Source 208/220V, 3-Phase, 150 Amps
Consult AMT or local distributor for exact power requirements when ordering
Hydraulic Pump Motor 7.5 HP
Absolute Machine Tools
SEARCH