Specs
Standard Accessories
Optional Accessories
Videos
SPECIFICATIONS
Item / Model TD-2000YBC TD-2500YBC
Capacities
Swing over Bed/Front Cover 27.5″ 27.5″
Standard Turning Diameter 12.2″ 12.2″
Max. Turning Diameter 14.17″ 14.17″
Max. Cross Travel X-Axis 9.05″ 9.05″
Max. Longitudinal Travel Z-Axis 23.6″ 23.6″
Max. Sub-Spindle Travel B-Axis 24.8″ 24.8″
Optional Max. Y-Axis Travel ± 2″ from Center Line ± 2″ from Center Line
Distance between Spindles
(from std. chuck face to chuck face)
23.6″ Max. 23.6″ Max.
Spindle Center Line from Floor (height) 42.3″ 42.3″
Main Spindle
Spindle Motor 20 HP 20 HP Belt Drive
Spindle Nose A2-6 A2-8
Spindle RPM 30 – 4,500 (8″ Chuck) 3,500 (2,500 for 3″ Bar Capacity)
Hole through Spindle 2.4″ 3.03″ (3.39″ for 3″ Bar Capacity
Bar Capacity 2.05″ 2.52″ (3.03″ for 3″ Bar Capacity)
Spindle Bearing Diameter 3.94″ I.D. 4.72″ (5.12″ for 3″ Bar Capacity)
Spindle Inside Taper M.T. 5
Hydraulic Chuck 8″ 3-Jaw 10″ 3-Jaw
Sub-Spindle
Spindle Motor 10 HP 10 HP Integral
Spindle Nose A2-5 A2-5
Spindle RPM 30 – 5,000 30 – 5,000
Hole through Spindle 1.77″ 1.77″
Bar Capacity 1.37″ 1.37″
Spindle Bearing Diameter 3.54″ I.D. 3.54″ I.D.
Hydraulic Chuck 6″ 3-Jaw 6″ 3-Jaw
Turret
Turret Tool Positions 12 (16 opt.) 12 (16 opt.)
Turret Type Servo Servo
Tool Mounting BMT-65 (BMT-55 opt.) BMT-65 (BMT-55 opt.)
Turret Live Spindle Motor 7.5 HP 7.5 HP
Live Spindle RPM 5,000 5,000
O.D. Tool Shank Size 1″ (.75″ opt.) 1″ (.75″ opt.)
I.D. Tool Shank Size 1.5″ (1.25″ opt.) 1.5″ (1.25″ opt.)
Index Time .3 Seconds .3 Seconds
C-Axis and Live Tools (Main Spindle)
Tool Shank Type BMT-65 BMT-65
C-Axis Increment of Spindle .001° .001°
C-Axis and Live Tools (Sub-Spindle)
Tool Shank Type BMT-65 BMT-65
C-Axis Increment of Spindle .001° .001°
Ballscrews and Axis Motors
X-Z-B-Axis Ballscrew Diameter 36 mm (1.26″) x 12 Pitch 36 mm (1.26″) x 12 Pitch
Y-Axis Ballscrew Diameter 36 mm (1.26″) x 10 Pitch 36 mm (1.26″) x 10 Pitch
Ballscrew Type Class 3 Double-Nut Pre-loaded Class 3 Double-Nut Pre-loaded
Ballscrew Mounting Type Pre-tensioned Pre-tensioned
X-Z-B-Y Servo Motor X / Z 6.0 HP, B / Y 3.5 HP X / Z 6.0 HP, B / Y 3.5 HP
Feeds
Rapid Traverse Rate X, Z, B, Y 1,181 (X/Z/B), 590 (Y) IPM 1,181 (X/Z/B), 590 (Y) IPM
Cutting Feed Rate 0.01 – 315 IPM 0.01 – 315 IPM
Positioning Accuracy ± .0002″ Full Stroke ± .0002″ Full Stroke
Repeatability ± .0001″ ± .0001″
General
Coolant Tank Capacity 105 Gallons 105 Gallons
Coolant Pump Motor .75 HP .75 HP
Machine Weight (Base Only) 17,000 lbs. 17,500 lbs.
Floor Space
(without bar feeder, with chip conveyor)
168″ x 86″ x 92″ 168″ x 86″ x 92″
Machine Power Source* 208/220 Volts, 3 Phase 125 Amps 208/220 Volts, 3 Phase 125 Amps
Hydraulic Pump Motor 2 HP 2 HP
  • Consult AMT or AMT local distributor for exact power requirements when ordering.

 

  • Complete coolant system
  • Built-in work light
  • Hydraulic 8″ (2000) or 10″ (2500) chuck front / 6” chuck rear
  • Soft jaws
  • Workpiece counter
  • 1 Set of Instruction Manuals
  • Chip conveyor
  • 3 color operation light
  • C axis on main spindle and sub spindle (.001 degree)
  • Part ejector on sub spindle
  • Synchronous sub-spindle
  • Sub-spindle chiller unit
  • Turret static tooling including (2) OD tool holders, (2) ID tool holders, (6) pcs sleeves – 3/8”, ½”, 5/8”, ¾”, 1”, 1-1/4”, (3) pcs drill sleeves MT#1, 2, and 3
  • Fanuc Manual Guide i Conversational with 10.4” color TFT
  • Parts catcher
  • Parts conveyor (to automatically empty parts catcher)
  • Barfeed interface
  • Renishaw LP-2 part probe with installation and training
  • Manual swing down tool presetter
  • Auto tool presetter
  • Chuck air blast
  • High pressure coolant 300 PSI
  • 16 station turret with BMT-55 instead of 12 station turret
  • (2000) 25HP built-in motor main spindle instead of belt drive
  • (2500) 25HP built-in motor main spindle instead of belt drive (5,000 RPM for 2.5″ / 3,500 for 3″)
  • (2500) 3″ bar capacity spindle instead of 2.5″
  • 440/460/480 Volt operation
  • BMT-65 1” O.D. static tool holders
  • BMT-65 1.5” I.D. static holders
  • BMT-65 1” static facing holders
  • BMT-65 I.D. holder reduction sleeves
  • BMT-65 Radial live tool heads
  • BMT-65 Axial live tool heads
  • BMT-55 Radial live tool heads (for 16 tool turret)
  • BMT-55 Axial live tool heads (for 16 tool turret)
  • Oil skimmer
  • BF-1500 Bar feeder 1500mm pneumatic magazine loader with rail retract system
  • TRACER Vs-80L Servo Bar feeder 1500mm short loader with rail retract system
  • Data Server with 1GB built-in ATA card and Fast Ethernet connection
  • 1 Megabyte RAM program memory
  • Memory card editing function (to enable editing on the compact flash card)
  • Data Server Editing function (to enable editing on the ATA card)
  • Data Server with 1GB built-in ATA card and Fast Ethernet connection
  • 1 Megabyte RAM program memory
  • Memory card editing function (to enable editing on the compact flash card)
  • Data Server Editing fuction (to enable editing on the ATA card)

 

Barfeeder – Tongtai BF-1500

  • Automatic bar loading system, model BF-1500, bar capacity 1/4” to 2.5” diameter by 5’ long.
  • Note: Actual bar length is determined by the length of spindle on the machine.
  • Includes:
  • (3) Pusher sizes (1/4”, 1/2” and 3/4”)
  • (1) Material tray will hold (24) 1” bars or (9) 2.5” bars
  • Feed to stop
  • Automatic pusher retract
  • Pusher activated by Festo air cylinder for fast load and retract times
  • Portable hand held operator control pendant
  • Spindle Liners priced separately
  • Installation & Hook-Up Including Expenses priced separately
  • ***No end of bar preparation is needed with this bar loader

For Thanksgiving, our offices will be closed Thursday & Friday, November 26-27, 2020.