Direct Drive 4th and 4th and 5th Axis High Speed Series
RC Series
Specifications
| Item / Model |
Unit
|
AD-250HS
Request a Quote
|
HAD-210F-HS
Request a Quote
|
FAD-170F-HS Request a Quote | FAD-210F-HS Request a Quote | FAD-300F-HS Request a Quote |
|---|---|---|---|---|---|---|
|
Can work as a lathe |
Horizontal |
Two D.D. Motors: 2000 RPM Can Work as aLathe |
Two D.D. Motors: 2000 RPM Can Work as aLathe |
Two D.D. Motors: 2000 RPM Can Work as a Lathe |
||
|
Table Diameter |
mm |
Ø250 |
Ø210 |
Ø170 |
Ø210 |
Ø300 |
|
Diameter of Table Central Hole |
mm |
Ø50H7 x 5.5 deep |
Ø40H7 x 12 deep |
Ø40h7 x 12 deep |
Ø40h7 x 12 deep |
Ø25H7 x 12 deep |
|
Inner Diameter of Mandrel Sleeve |
mm |
– |
– |
– |
– |
– |
|
Diameter of Center Through Hole |
mm |
– |
– |
– |
– |
– |
|
Center Height (Vertical) |
mm |
200 |
– |
– |
– |
– |
|
Table Height (Horizontal) |
mm |
335 |
240 |
290 |
290 |
385 |
|
Table T-slot Width |
mm |
– |
– |
– |
– |
14H7 |
|
Guide Block Width |
mm |
– |
14h7 |
18h7 |
18h7 |
14h7 |
|
Axis (Rotary) |
– |
– |
– |
|||
|
Cooling System |
– |
Water Cooling |
Water Cooling |
Water Cooling |
Water Cooling |
Water Cooling |
|
Transmission Mechanism |
– |
D.D. Motor |
D.D. Motor |
D.D. Motor |
D.D. Motor |
D.D. Motor |
|
Min. Increment |
deg. |
0.001 |
0.001 |
0.001 |
0.001 |
0.001 |
|
Indexing Precision (while tilt 0° ~+90˚ |
sec. |
20 |
20 |
20 |
20 |
20 |
|
Repeatability |
sec. |
4 |
4 |
4 |
4 |
4 |
|
Clamping Torque |
kg-m |
450 (Powerful) |
310 |
310 |
310 |
430 |
|
Rated / Max. Speed |
r.p.m |
1100/2000 |
1900/2880 |
1900/2880 |
1900/2880 |
818/2000 |
|
Rated / Max. Cutting Torque |
Nm |
113/169 |
48/- |
48/- |
48/- |
113/- |
|
Axis (Tilt ±100˚) |
||||||
|
Cooling System |
– |
– |
Free Cooling |
Free Cooling |
Water Cooling |
|
|
Indexing Precision (while tilt 0° ~+90˚ |
sec. |
– |
– |
30 |
30 |
20 |
|
Repeatability |
sec. |
– |
– |
8 |
8 |
8 |
|
Clamping Torque |
Nm |
– |
– |
500 |
500 |
730 |
|
Rated / Max. Speed |
r.p.m |
– |
– |
150/200 |
150/200 |
50/- |
|
Rated / Max. Cutting Torque |
Nm |
– |
– |
48/(Water Cooling 118) |
48/(Water Cooling 118) |
554/741 |
|
Clamping System (Pneumatic) |
kg/cm2 |
6 |
6 |
6 |
6 |
6 |
|
Servo Motor Model (FANUC) |
Taper shaft |
DD Motor |
DD Motor |
DD Motor |
DD Motor |
DD Motor |
|
Servo Motor Model (MITSUBISHI) |
Taper shaft |
DD Motor |
DD Motor |
DD Motor |
DD Motor |
DD Motor |
|
Speed Reduction Ratio |
– |
Direct Drive |
Direct Drive |
Direct Drive |
Direct Drive |
Direct Drive |
|
Allowable Inertia Load Capacity (Horizontal) |
kg ∙ cm / sec2 |
3.1 |
– |
– |
– |
– |
|
Allowable Workpiece Load (Dynamic) |
kg |
Please refer to the manual |
Please refer to the manual |
Please refer to the manual |
Please refer to the manual |
Please refer to the manual |
|
Allowable Load with Rotary Table Clamping (F)  |
N |
10000 |
4000 |
4000 |
4000 |
– |
|
Allowable Load with Rotary Table Clamping (FxL)  |
Nm |
1150 |
500 |
500 |
500 |
730 |
|
Allowable Load with Rotary Table Clamping (FxL)  |
Nm |
550 |
310 |
500 |
500 |
430 |
|
Net Weight (servo motor excluded) |
kg |
158 |
– |
– |
– |
– |
|
Electrical Specification |
||||||
|
Encoder |
– |
Subject to demand and controller |
Subject to demand and controller |
Subject to demand and controller |
Subject to demand and controller |
Subject to demand and controller |
|
Voltage (Back E.M.F) |
Vrms/100rpm |
33 |
14.2 |
Rotary axis: 14.2 |
Rotary axis: 14.2 |
Rotary axis: 33 |
|
Rotor Poles |
– |
22 |
22 |
22 |
22 |
22 |
|
Rated / Max. Current |
Arms |
26.5/50.2 |
26.1 |
26.1 |
26.1 |
26.5/50.2 |
|
Power Rating |
KW |
9.9 |
9.7 |
9.7 |
0.76 |
9.9/2.11 |