Absolute Machine Tools IMTS 2022
Specs
Standard Accessories
SPECIFICATIONS
Item / Model CTV-900 CTV-1100
Request a Quote Request a Quote
Max Swing 35.4″ 43.3″
Max Turning Diameter 35.4″ 43.3″
Max Cross Travel (X-Axis) -2.36″ +21″ -2.36″ +21″
Max Longitudinal Travel (Z-Axis) 31.5″ 33.5″
Max Off-Center Travel (opt. Y-Axis) -1.97″ +11.8″ -1.97″ +15.7″
Max Cutting Height 23.6″ 27.5″
Spindle
Spindle Motor (Fanuc P Series) 30 HP Double Wound
(More torque at lower RPM than a 50HP single wound motor)
30 HP Double Wound
(More torque at lower RPM than a 50HP single wound motor)
Spindle Drive 2 Speed ZF Planetary Gearbox 2 Speed ZF Planetary Gearbox
Spindle Nose A2-11 A2-15
Spindle RPM 0-1500 RPM 0-1,000 RPM
Spindle Bearing Inner Diameter 7.87″ 8.66″
Max Spindle Weight Load 3,960 lbs. 5,500 lbs.
Hydraulic Chuck 24″ 3-Jaw 32″ 3-Jaw
ATC (Standard)
Tool Positions 24 24
ATC Type Swing Arm Swing Arm
Tool Mounting CAPTO C8 CAPTO C8
O.D. Tool Shank Size 1.25″ 1.25″
I.D. Tool Shank Size 2.0″ 2.0″
Tool Change Time 6 Seconds 6 Seconds
Ballscrews & Axis Motors
Z-Axis Ballscrew Diameter 50mm (1.96″) x 10mm Pitch 50mm (1.96″) x 10mm Pitch
X-Axis Ballscrew Diameter 50mm (1.96″) x 10mm Pitch 50mm (1.96″) x 10mm Pitch
Y-Axis Ballscrew Diameter (opt.) 50mm (1.96″) x 10mm Pitch 50mm (1.96″) x 10mm Pitch
Ballscrew Type Class 3 Double Nut Class 3 Double Nut
Ballscrew Mounting Type Preloaded, Double Anchored Preloaded, Double Anchored
X-Z-Y Servo Motor HP (X) 5.2 HP, (Z) 5.2 HP, (Y) 9.0 HP (X) 5.2 HP, (Z) 5.2 HP, (Y) 9.0 HP
C-Axis & Live Tools (opt.)
Spindle Motor 10 HP 15 HP
Spindle RPM 3,500 RPM 3,500 RPM
Tool Shank Type CAPTO C8 CAPTO C8
C-Axis Indexing .001° .001°
Feeds
Rapid Traverse Rate X,Z,Y 472, 787, 236 IPM 472, 787, 236 IPM
Cutting Feed Rate 0.01 – 315 IPM 0.01 – 315 IPM
Positioning Accuracy +/- .0003″ Full Stroke +/- .0003″ Full Stroke
Repeatability +/- .0002″ +/- .0002″
General
Coolant Tank Capacity 80 Gallons 95 Gallons
Coolant Pump Motor 1.33 HP and .75 HP 1.33 HP and .75 HP
Machine Weight 39,600 lbs. 41,800 lbs.
Floor Space 163″ x 120″ x 164″ 171″ x 121″ x 168″
Machine Power Source 208/220V, 3-Phase, 150 Amps* 208/220V, 3-Phase, 150 Amps*
Hydraulic Pump Motor 3 HP 3 HP
  • Consult AMT for exact power requirements when ordering

Spindle Orientation
3 Jaw 32” Hydraulic Chuck with Cylinder
1 Set of Soft Jaws
1 Set of Hard Jaws
Coolant System with Coolant through the Tool Holders
Oil Skimmer
Tool Kit
Halogen Lamp
1 Set Operation Manual
24 Position CAPTO C8 ATC
Chip Conveyor with Chip Bucket
Heat Exchanger for Electrical Cabinet
Automatic Lubrication System