Specs
Videos
UM-500DH
Request a Quote
Travels
X-Axis Travel 40.9″
Y-Axis Travel 20.47″
Z-Axis Travel Z-Axis (Head 1): 23.6″ – W-Axis (Head 2): 23.6″
Table to Spindle 5.9″ min. / 29.5″ max.
Spindle Center to Column 23.2″
Automatic Tool Changer
Number of Tools 30 (+1 in the Spindle) x 2
Tool Selection Bi-Directional Random
Tool Change Time 2.1 Sec. Tool-to-Tool
Chip to Chip Time 3.5 Sec. Chip-to-Chip
Maximum Tool Diameter 3.15″ with Adjacent Tools (5.9″ Without)
Maximum Tool Weight 15.4 lbs.
Tool Type CAT-40
Maximum Tool Length 11.8″
Spindle (Standard)
Spindle Motor 7.4 HP 30 min. / 5 HP continuous
Spindle Taper BBT-30 Dual Contact
Spindle Drive System Direct Drive
Spindle Speed 0 – 12,000 RPM
Ballscrews & Axis Motors
Ballscrew Diameter X-Y-Z X 40mm (1.57”) x 16mm pitch, Y 40mm (1.57”) x 16mm, Z 40mm (1.57”) x 12mm (2)
Ballscrew Type Class 3 Double Nut Pre-Loaded
Ballscrew Mounting Type Double Anchored
Servo Motor HP X-Y-Z 6.0 – 6.0 – 6.0 x 2
Servo Motor Mounting Direct Coupled
Table
Table Working Surface 47.2″ x 20.47″
Max. Workload on Table 1,760 lbs.
Table Surface Ground / T-Slotted
Feeds
Rapid Traverse Rate X, Y, Z 1,575, 1,575, 1,417 IPM
Cutting Feed Rate 0.01 – 787 IPM
Positioning Accuracy +/- .0002″ Full Stroke
Repeatability +/- .00015″
General
Coolant Tank Capacity 110 Gallons
Machine Weight 18,700 lbs.
Floor Space 109″ (+ 43.5″ for Chip Conveyor) x 93″ x 127″
Power Source 208/220 Volts, 3 Phase, 60 KVA**
Air Source 90 PSI
**Consult AMT or your local distributor for exact power requirements when ordering**
Absolute Machine Tools
SEARCH