5 Axis Submerged wire EDM Linear Motor XY, AWT

5 Axis Submerged wire EDM Linear Motor XY, AWT

CNC PC Based Conversational Sink EDM, 240 AMP Power Supply, C-Axis, Fast Fill, Auto Drain w/ M Code, Dielectric Cooler, Fire Extinguisher

CNC PC Based Conversational Sink EDM, 240 AMP Power Supply, C-Axis, Fast Fill, Auto Drain w/ M Code, Dielectric Cooler, Fire Extinguisher

6-Axis FANUC CRX-10iA/L Long Arm Collaborative Robot is equipped with all standard accessories including 10Kg payload capacity (22lbs.), 1418mm reach (55.82”), composite speed of 1000mm/sec collaborative mode and 2000mm/sec in high-speed mode, 360° rotation in J-2, ±0.04mm repeatability, IP67, R-30iB mini plus controller (IP54), NEW intuitive touch panel user interface w/ 3D View & Drop/Drag Programming, 1-year hardware & software warranty.

6-Axis FANUC CRX-10iA/L Long Arm Collaborative Robot is equipped with all standard accessories including 10Kg payload capacity (22lbs.), 1418mm reach (55.82”), composite speed of 1000mm/sec collaborative mode and 2000mm/sec in high-speed mode, 360° rotation in J-2, ±0.04mm repeatability, IP67, R-30iB mini plus controller (IP54), NEW intuitive touch panel user interface w/ 3D View & Drop/Drag Programming, 1-year hardware & software warranty.

6-Axis FANUC CRX-10iA/L Long Arm Collaborative Robot is equipped with all standard accessories including 10Kg payload capacity (22lbs.), 1418mm reach (55.82”), composite speed of 1000mm/sec collaborative mode and 2000mm/sec in high-speed mode, 360° rotation in J-2, ±0.04mm repeatability, IP67, R-30iB mini plus controller (IP54), NEW intuitive touch panel user interface w/ 3D View & Drop/Drag Programming, 1-year hardware & software warranty.

6-Axis FANUC CRX-10iA/L Long Arm Collaborative Robot is equipped with all standard accessories including 10Kg payload capacity (22lbs.), 1418mm reach (55.82”), composite speed of 1000mm/sec collaborative mode and 2000mm/sec in high-speed mode, 360° rotation in J-2, ±0.04mm repeatability, IP67, R-30iB mini plus controller (IP54), NEW intuitive touch panel user interface w/ 3D View & Drop/Drag Programming, 1-year hardware & software warranty.

6-Axis FANUC CRX-10iA/L Long Arm Collaborative Robot is equipped with all standard accessories including 10Kg payload capacity (22lbs.), 1418mm reach (55.82”), composite speed of 1000mm/sec collaborative mode and 2000mm/sec in high-speed mode, 360° rotation in J-2, ±0.04mm repeatability, IP67, R-30iB mini plus controller (IP54), NEW intuitive touch panel user interface w/ 3D View & Drop/Drag Programming, 1-year hardware & software warranty.

6-Axis Mitsubishi RV-70F floor-type industrial robot is equipped with all standard accessories including 70Kg payload (154 lbs.), 2050mm reach (80.70”), 11500mm/sec max composite speed, ±0.07mm position repeatability, MELFA basic programming language for integrating to other automation products, and 3-year on-site warranty (industry’s best initial warranty) DEMO Unit.

Mitsubishi LoadMate Plus machine tending robotic cell for fast consistent CNC applications including loading/unloading and palletizing parts for any low-to-high volume mix includes:  RV-8CRL 6-axis industrial robot (8kg payload capacity & 931mm reach), 3×3 base with stainless steel plate, polycarbonate enclosure, side-step extension, electric drawer, racheted nylon caster wheels, I/O connectivity for alternate control, safety door & door interlock switch, safety component package with I/O (does not include safety scanner), USB/PDF operations and maintenance manuals, 1-year warranty.  Additional options included:  graphic Windows color display premium teach pendant with 6.5” touch screen, RV-8 solenoid valve pack totaling 4 valves, additional digital I/O interface source-type 32 inputs & 32 outputs, digital I/O 15M interface cable.

7-Axis Collaborative Robot CNC Package with 5Kg payload and 1000mm reach includes:  robot arm, control handle, PRI parallel gripper, work/assembly table, rolling stand, control tablet, controller (computer), general I/O with 8 inputs/8 outputs, 4 analog inputs, 2 channel pneumatics with regulators (interchangeable on mills & lathes), 6″ pneumatic air vise, chip fan, 1-year software updates, 1-year hardware warranty, DEMO Unit.

7-Axis Collaborative Robot CNC Package with 5Kg payload and 1000mm reach includes:  robot arm, control handle, dual gripper, work/assembly table, rolling stand, control tablet, controller (computer), general I/O with 8 inputs/8 outputs, 4 analog inputs, 2 channel pneumatics with regulators (interchangeable on mills & lathes), 4″ pneumatic air vise, chip fan, 1-year software updates, 1-year hardware warranty, Livonia, MI office.

7-Axis Collaborative Robot CNC Package with 5Kg payload and 1000mm reach includes:  robot arm, control handle, PRI parallel gripper, work/assembly table, rolling stand, control tablet, controller (computer), general I/O with 8 inputs/8 outputs, 4 analog inputs, 2 channel pneumatics with regulators (interchangeable on mills & lathes), 6″ pneumatic air vise, chip fan, 1-year software updates, 1-year hardware warranty, DEMO Unit.

7-Axis Collaborative Robot CNC Package with 8Kg payload and 1700mm reach includes:  robot arm, control handle, PRI parallel gripper, work/assembly table, rolling stand, control tablet, controller (computer), general I/O with 8 inputs/8 outputs, 4 analog inputs, 2 channel pneumatics with regulators (interchangeable on mills & lathes), 6″ pneumatic air vise, chip fan, 1-year software updates, 1-year hardware warranty.

7-Axis Collaborative Robot CNC Package with 4Kg payload and 1250mm reach includes:  robot arm, control handle, PRI parallel gripper, work/assembly table, rolling stand, control tablet, controller (computer), general I/O with 8 inputs/8 outputs, 4 analog inputs, 2 channel pneumatics with regulators (interchangeable on mills & lathes), 6″ pneumatic air vise, chip fan, 1-year software updates, 1-year hardware warranty, DEMO Unit.

BMC-110 w/ Fanuc 0iMF-PLUS Ctrl, 35HP, 60 Tool Arm-type ATC – CAT-50, 78.7×70.8×63, Caterpillar Conveyor, Heidenhain Scales in X,Y & Z, Full 4th Axis Rotary Table w/ Locating Pins Every 90 Degrees, Table Guarding, 300psi CTS

BMC-110 w/ Fanuc 0iMF-PLUS Ctrl, 35HP, 60 Tool Arm-type ATC – CAT-50, 78.7×70.8×63, Caterpillar Conveyor, Heidenhain Scales in X,Y & Z, Full 4th Axis Rotary Table w/ Locating Pins Every 90 Degrees, Table Guarding, 300psi CTS

BMC-130 w/ Fanuc 0iM-F Plus Ctrl, 50HP, 60 Tool Arm-type ATC – CAT-50. 118×90.5×63, Caterpillar Conveyor, Heidenhain Scales in X,Y & Z, Full 4th Axis Rotary Table w/ Locating Pins Every 90 Degrees, Table Guarding, 300psi CTS

HBM-130 Horizontal Boring Mill with Fanuc 31iMB Control, 60HP, 60 Tool Arm-type ATC – CAT-50, 300psi CTS, Caterpillar Conveyor, Heidenhain Scales X, Y, and Z, Full 4th Axis Table with Locating Pins Every 90 Degrees and B Axis Rotary Scale, Guarding, X-Axis Hydrostatic Ways and Table Load Capacity of 55,000 lbs.

DMC-1200H with Fanuc 0iM-F Plus Ctrl, 6000 RPM, 25HP, 2-speed Gearbox, 40 Tool ATC, Chip Conveyor, 1000psi CTS

DMC-1500H w/ Fanuc 0iM-F Plus with Manual Guide i, 25HP Spindle Motor, 6000 RPM with Chiller, 40 Tool ATC – CAT-50, 59.1×35.4×30, 2-speed Gearbox, Twin Screw-type & One Caterpillar Conveyor, Full Enclosure, 1000psi CTS

DMC-1600H Hi-Net w/ Fanuc 0iM-F Plus Control, Data Server, AICC-II (400 Block Look Ahead), 10,000 RPM, 35HP Direct-drive Spindle – MCAT-50 Dual Contact, 40 Tool Arm-type ATC, Twin Screw-type & One Caterpillar Conveyor, Heidenhain X,Y,Z, 1000psi

DMC-1600H w/ Fanuc 0iM-F Plus with 10.4 Color LCD and Manual Guidance i, 6000 RPM, 35HP + 2-speed Gearbox, 40 Tool Arm-type ATC – CAT-50, Twin Screw-type & One Caterpillar Conveyor, 51 Y, 1000psi CTS

DMC-2100H w/ Fanuc 0iM-F Plus Ctrl with 10.4 Color LCD and Manual Guide i, 35HP + 2-speed Gearbox, 6000 RPM, 40 Tool Arm-type ATC – CAT-50, Twin Screw-type and One Caterpillar Conveyor, 51 Y Travel, Full Enclosure, 1000psi CTS

DMC-2100H w/ Fanuc 0iM-F Plus Ctrl with 10.4 Color LCD and Manual Guide i, 35HP + 2-speed Gearbox, 6000 RPM, 40 Tool Arm-type ATC – CAT-50, Twin Screw-type and One Caterpillar Conveyor, 51 Y Travel, Full Enclosure, 1000psi CTS

DMC-2100H w/ Fanuc 0iM-F Plus Ctrl with 10.4 Color LCD and Manual Guide i, 35HP + 2-speed Gearbox, 6000 RPM, 40 Tool Arm-type ATC – CAT-50, Twin Screw-type and One Caterpillar Conveyor, 51 Y Travel, Full Enclosure, 1000psi CTS

DMC-2100H w/ Fanuc 0iM-F Plus Ctrl with 10.4 Color LCD and Manual Guide i, 35HP + 2-speed Gearbox, 6000 RPM, 40 Tool Arm-type ATC – CAT-50, Twin Screw-type and One Caterpillar Conveyor, 51 Y Travel, Full Enclosure, 1000psi CTS

DMC-4100PH with Fanuc OiM-F Plus Ctrl with 10.4 Color LCD and Manual Guide i, 6000 RPM, 35HP + 2-speed Gearbox, 40 Tool Arm-type ATC – CAT-50, Extended Z, 1000psi CTS

YouJi DSM480 with MITS Series C Control w/ 10.4″ Color LCD, 20HP x 2, 40mm Rotary Table, Chip Conveyor, 10 pcs each for top / bottom fixture (AMT – Elgin, IL)

KT-360D with MITS M80A Ctrl, 15,000 RPM, 7.5HP, 21 Tool ATC, Conveyor, 1000psi CTS Prep (AMT – Lorain, OH)

KT-420L with MITS M80A Ctrl, 15,000 RPM, 6.5HP, 21 Tool ATC, Conveyor, 1000psi CTS Prep (Location: Lorain, OH)

PT400S Milling and Tapping Center with MITS M80A with 10.4″ color LCD, 24,000 RPM DD Spindle, BBT-30, 24 Tool Arm Type ATC, Bed Flush, Top Cover, CTS Prep (AMT – Mason, OH)

PT400S Milling and Tapping Center with MITS M80A with 10.4″ color LCD, 24,000 RPM DD Spindle, BBT-30, 24 Tool Arm Type ATC, Bed Flush, Top Cover, CTS Prep (AMT – Mason, OH)

UM500DH Dual Spindle Machining Center with MITS M80A with 10.4″ color LCD, 12,000 RPM DD Spindle, CAT-40, Twin 30 Tool Arm Type ATCs, Bed Flush, Top Cover, CTS Prep, Hinge-type Chip Conveyor

UT360D Dual Pallet Drill / Tap Center with MITS M80A with 10.4″ color LCD, 15,000 RPM DD Spindle, BBT-30, 24 Tool Arm Type ATC, Bed Flush, Top Cover, CTS Prep (AMT – Mason, OH)

UT380 Milling and Tapping Center with MITS M80A with 10.4″ color LCD, 15,000 RPM DD Spindle, BBT-30, 20 Tool Servo Turret Type ATC, Bed Flush, Top Cover, CTS Prep (AMT – Mason, OH)

UT380 Milling and Tapping Center with MITS M80A with 10.4″ color LCD, 15,000 RPM DD Spindle, BBT-30, 20 Tool Servo Turret Type ATC, Bed Flush, Top Cover, CTS Prep (AMT – Mason, OH)

UT420 Milling and Tapping Center with MITS M80A with 10.4″ color LCD, 15,000 RPM DD Spindle, BBT-30, 20 Tool Servo Turret Type ATC, Bed Flush, Top Cover, CTS Prep (AMT – Mason, OH)

UT420 Milling and Tapping Center with MITS M80A with 10.4″ color LCD, 15,000 RPM DD Spindle, BBT-30, 20 Tool Servo Turret Type ATC, Bed Flush, Top Cover, CTS Prep (AMT – Mason, OH)

ZNC Drilling EDM, HP1+ Generator, Electrode Support

River 35 HPI (350×250) Touch screen, with standard accessories, generator (0.1-3.0mm drilling), standard ceramic guide 1.0mm (1 piece), brass electrode 1.0mm (10 pieces), Electrode holder – BS Type.

River 35 HPI (350×250) Touch screen, with standard accessories, generator (0.1-3.0mm drilling), standard ceramic guide 1.0mm (1 piece), brass electrode 1.0mm (10 pieces), Electrode holder – BS Type.

River 350 (25A) with standard accessories, generator (0.1-3.0mm drilling), standard ceramic guide 1.0mm (1 piece), brass electrode 1.0mm (10 pieces), ATC 12 (12 pos. elec. chngr. w/3 BS hldrs), electrode support, BS type electrode holder (9 pieces).

2-spindle micro gun drilling machine

GVN 12C/4-800 4-spindle Gun Drilling Machine.

DEMO: Precihole XY GVN 40/1-120 Single Spindle Gun Drilling
Machine with Fanuc OiMD Control, Tool Head Spindle: 25HP, 450 to
5000 RPM Spnidle RPM Range; Secondary Spindle: 25HP, 100 to
2000 Spiindle RPM Range, 6″ Max Stroke; 48″ Max Drilling Stroke,
96″Lx48″Wx36″H Max Block Dimension, Chip Conveyor  (AMT – Elgin, IL)

AHC-1600 Horizontal Machining Center with Fanuc 0iM-F Plus Control with 10.4 Color LCD and Manual Guide i, 6000 RPM with Chiller, 35HP Spindle Motor + 2-speed Gearbox, 40 Tool Arm-type ATC – CAT-50, 63x50x40, Full 800mm 4th Axis Built-in Rotary Table, (4) Screw-type Conveyors, Full Enclosure, 1000psi, Caterpillar Conveyor.  Will ship disassembled.

AHC-1600 Horizontal Machining Center with Fanuc 0iM-F Plus Control with 10.4 Color LCD and Manual Guide i, 6000 RPM with Chiller, 35HP Spindle Motor + 2-speed Gearbox, 40 Tool Arm-type ATC – CAT-50, 63x50x40, Full 800mm 4th Axis Built-in Rotary Table, (4) Screw-type Conveyors, Full Enclosure, 1000psi, Caterpillar Conveyor (Premier)

Fanuc 0iM-F Step 2 Control, Rigid Tapping, 10,000 RPM, 30HP, 60 Tool ATC – CAT-50, 2-Pallet APC, Full B-Axis .001 degree, Complete Splash Guard, Chip Conveyor, 1000psi CTS (Premier)

2012: Tongtai HB-630 with Fanuc 31iMB Control, 10,000 RPM, CT-50 Big Plus, 40HP, 60 Tool ATC, Full B Axis with .001°, 5th & 6th Axis Fanuc Servo Drive Modules & Cabling, Extended Height Sheet Metal Raising Max Part Height to 47.24″, Separate Hydraulic Pkg for Clamp System, 480V to 208V Transformer (F.O.B. Michigan)

Fanuc 31i-B Control, 6000 RPM, 30HP, 120 Tool ATC, Spindle Cooler, 225psi Coolant-thru-spindle, APC Unit & B Axis Index, Rotary Table Dynamic Fixture Offset, Chain-type Chip Conveyor, Linear Scales X/Y/Z (AMT – Elgin, IL))

400mm New-Style Horizontal Machining Center with Fanuc OiM-F Control with 10.4″ Color LCD and Manual Guide i, 15,000 RPM Built-in 25/30 HP Spindle with Air/Oil Mist Lube and Cooler, Big Plus CAT-40, 60 Tool Arm-Type ATC, Full B-Axis .001 Degree, 2 Pallet APC, Prepped for Field Tool Setter Install, 400psi CTS, Integrated Style Dual Level Chip Conveyor for Aluminum (Premier)

400mm New-Style Horizontal Machining Center with Fanuc OiM-F Control with 10.4″ Color LCD and Manual Guide i, 15,000 RPM Built-in 25/30 HP Spindle with Air/Oil Mist Lube and Cooler, Big Plus CAT-40, 60 Tool Arm-Type ATC, Full B-Axis .001 Degree, 2 Pallet APC, Prepped for Field Tool Setter Install, 400psi CTS, Integrated Style Dual Level Chip Conveyor for Aluminum

400mm New-Style Horizontal Machining Center with Fanuc OiM-F Control with 10.4″ Color LCD and Manual Guide i, 15,000 RPM Built-in 25/30 HP Spindle with Air/Oil Mist Lube and Cooler, Big Plus CAT-40, 60 Tool Arm-Type ATC, Full B-Axis .001 Degree, 2 Pallet APC, Prepped for Field Tool Setter Install, 400psi CTS, Integrated Style Dual Level Chip Conveyor for Aluminum

400mm New-Style Horizontal Machining Center with Fanuc OiM-F Control with 10.4″ Color LCD and Manual Guide i, 15,000 RPM Built-in 25/30 HP Spindle with Air/Oil Mist Lube and Cooler, Big Plus CAT-40, 60 Tool Arm-Type ATC, Full B-Axis .001 Degree, 2 Pallet APC, Prepped for Field Tool Setter Install, 400psi CTS, Integrated Style Dual Level Chip Conveyor for Aluminum

HT-80CX-2D+C+Y with Fanuc OiT-F 2-path Control w/ MGI, Upper Turret BMT-85 Live Turret with C Axis, Y Axis, Lower Turret 12 station Standard Turret, 4” Diameter Long and Heavy Boring Bar Holder for Lower Turret, Rotary Tailstock, 4-Speed Gearbox, 1500 RPM, 50HP, 20” Chuck, 5.5” Bar Capacity, Chuck Air Blast, Caterpillar Conveyor, Auto Doors, 300psi x 2

SHV-1000 “Hi-Net” Machining Center with Fanuc 31iM-B Ctrl, Manual Guide i with
10.4″ Color LCD, Data Server, High Speed Machining 1000 Block Look Ahead,
24,000 RPM Weiss Spindle, 32 Tool ATC, Twin Screw-type and One Caterpillar
Conveyor, 3-Axis Heidenhain Linear Scales, 1000psi CTS

SL-300L-II with Fanuc 0iT-F PLUS, 4500 RPM, 20HP P Motor, 8″ Chuck, 2″ Bar Capacity, Fully Programmable Tailstock, Double Atling AX-2 Hydraulic Steady Rests

SL-500A w/Fanuc 0iT-F Plus Ctrl with 10.4 LCD and Manual Guide i Conversational, 2800 RPM, 35HP + 2-speed Gearbox, 4 Bar Capacity, 12 Chuck, Caterpillar Conveyor

SL-500A w/Fanuc 0iT-F Plus Ctrl with 10.4 LCD and Manual Guide i Conversational, 2800 RPM, 35HP + 2-speed Gearbox, 4 Bar Capacity, 12 Chuck, Caterpillar Conveyor.

SL-500A-2SCY with Fanuc 0iT-F Plus with MGI, 2800 RPM, 40HP, 12 Chuck, Caterpillar Conveyor, Air Blast on Main and Sub, Parts Catcher & Parts Conveyor on Sub, Bar Feeder Interface Plug

SL-600A with Fanuc 0iT-F Plus Ctrl with MGI, 2800 RPM, 40HP, 12 Chuck, Caterpillar Conveyor, C-Axis & Live Tools, Y Axis, Bar Feeder Interface Plug

SL-600A with Fanuc 0iT-F Plus Ctrl with MGI, 2800 RPM, 40HP, 12 Chuck, Caterpillar Conveyor, C-Axis & Live Tools, Y Axis, Bar Feeder Interface Plug (Premier)

SL-600A with Fanuc 0iT-F Plus Ctrl with MGI, 2800 RPM, 40HP, 12 Chuck, Caterpillar Conveyor, C-Axis & Live Tools, Y Axis, Bar Feeder Interface Plug (Premier)

SL-650B w/ Fanuc 0iT-F PLUS Ctrl with 10.4 Color LCD and Manual Guide i ConversationaL, 2000 RPM, 35HP + 2-speed Gearbox, 15 Chuck, Rotary Tailstock, Hydraulic CLT-125 Turret (Premier)

SL-650B w/ Fanuc 0iT-F PLUS Ctrl with 10.4 Color LCD and Manual Guide i ConversationaL, 2000 RPM, 35HP + 2-speed Gearbox, 15 Chuck, Rotary Tailstock, Hydraulic CLT-125 Turret (Premier)

ST-100CH with Fanuc 0iT-F PLUS, C and Y Axis, 50HP, 15 Hp Live Tool Spindle Motor, 1400 RPM, 4-speed Gearbox, 24 Chuck, Rotary Tailstock, Caterpillar Conveyor

Johnford ST-130DX super turning center with all standard accessories including caterpillar conveyor, 12 station turret, fully programmable tailstock, 1000 RPM, 60HP, 4 speed gearbox, 32? chuck, 6.5? bar capacity, Fanuc OiT-F Plus with Manual Guide i, rotary tailstock, C axis and live tools BMT-85 – 15HP, Y axis function +/- 4? travel, 300 PSI coolant pump

ST-40BH w/ Fanuc 0iT-F Plus Control with 10.4 Color LCD and Manual Guide i, 2000 RPM, 50HP, 12-station Turret, 18 Chuck, 4-speed Gearbox, Rotary Tailstock, Caterpillar Conveyor

ST-40CX w/ Fanuc 0iT-F Plus Ctrl and Manual Guide i, 1400 RPM, 50HP, 4-speed Gearbox, 24 Chuck, Caterpillar Conveyor, Rotary Tailstock

ST-60CX-2SCY with Fanuc OiTF with MGI, 1500 RPM, 50HP, 20″
Chuck, BMT-75 Turret with C Axis Main Spindle, Enlarged sub spindle
(A2-11, 2800 RPM, 4” bar capacity, 12” chuck, 40HP), 15″ Chuck on
Sub, Auto Doors, Auto Tool Setter, Caterpillar Conveyor, Chuck Air
Blast, 300psi (AMT – Lorain, OH)

Fanuc OiT-F Control with 10.4 Color LCD and MGI, 1000 RPM, 50HP, 4-speed Gearbox, C-Axis and Live Tools, Y-Axis, Rotary Tailstock, 24 Chuck, 300psi, (4) Radial Live Heads (BMT-85), (4) Axial Live Heads (BMT-85), Caterpillar Conveyor

SV-40 w/ Fagor 8065 Ctrl with 15″ Screen, 10000 RPM, 15HP, 2-
speed Gearbox, 24 Tool Arm-type ATC – CAT-40, 41″x20″x24″,
Caterpillar Conveyor, Full Enclosure, 1000psi CTS prep only (AMT –
Mason, OH)

SV-40 w/ Fanuc 0iM-F Plus Ctrl with Manual Guide i Conversational, 10000 RPM, 15HP, 2-speed Gearbox, 24 Tool Arm-type ATC – CAT-40, 41x20x24, Caterpillar Conveyor, Full Enclosure, 1000psi CTS prep only (AMT – Mason, OH)

SV-40 w/ Fanuc 0iM-F Plus Ctrl with Manual Guide i Conversational, 10000 RPM, 15HP, 2-speed Gearbox, 24 Tool Arm-type ATC – CAT-40, 41x20x24, Caterpillar Conveyor, Full Enclosure, 1000psi CTS prep only (AMT – Mason, OH)

SV-40 w/ Fanuc 0iM-F Plus Ctrl with Manual Guide i Conversational, 10000 RPM, 15HP, 2-speed Gearbox, 24 Tool Arm-type ATC – CAT-40, 41x20x24, Caterpillar Conveyor, Full Enclosure, 1000psi CTS prep only (Premier)

SV-41 w/ Fanuc OiMD with 10.4″ Color LCD and Manual Guide i,
10,000 RPM, 15HP, 32 Tool Arm-type ATC – CAT-40, 41.3″x24″x24″, 2
-speed Gearbox + Spindle Cooler, Twin Screw-type Conveyors & One
Caterpillar Conveyor, Full Enclosure, 1000psi CTS (Premier)

SV-48H with Fanuc OiM-F PLUS, 6000 RPM, 20HP, 24 Tool ATC, 2-speed Gearbox, Caterpillar Conveyor, 1000psi CTS

SV-60H with Fanuc OiM-F PLUS, 6000 RPM, 20HP, 24 Tool ATC, 2-speed Gearbox, Caterpillar Conveyor, 1000psi CTS

LND51D-S3 with MITS M830 Control, Three Servo Compound Slides, Full C-Axis Main & Sub, 8-Position All Live Tool Turret on Y Slide, Part Ejector & Air Nozzle in Sub Spindle, High Pressure (1,000 PSI) coolant pump, Lower Parts Catcher & Conveyor, Chip Conveyor, Hainbuch-style Dead Length Collet on Main

LND51D-S3 with MITS M830 Control, Three Servo Compound Slides, Full C-Axis Main & Sub, 8-Position All Live Tool Turret on Y Slide, Part Ejector & Air Nozzle in Sub Spindle, High Pressure (1,000 PSI) coolant pump, Lower Parts Catcher & Conveyor, Chip Conveyor, Hainbuch-style Dead Length Collet on Main

LND65D-S3 with Siemens 840D-SL Control, Three Servo Compound
Slides, Full C-Axis, 6″ 3-Jaw Chuck on Sub Spnidle, 8-Postion All Live
Tool Turret on Y Slide, Oil Mist Collector, Chip Conveyor (AMT –
Mason, OH)

LND65D-S3 with MITS M830 Control, Two Servo Compound Slides,
Upgrade 1 Std Compound Slide to Extended X-Axis Slide (110mm),
Full C-Axis, 8-Position All Live Tool Turret on Y Slide, Part Ejector &
Air Nozzle in Sub Spindle, Lower Parts Catcher at Counter Spindle,
Chip Conveyor (Premier)

LNT42S-S4 with Siemens 840D Control, Four Servo Compound
Slides, 8-PositionTurret, Chip Conveyor with Cart, Transformer (AMT –
Elgin, IL)

LNT42S-S4 with MITS 830 Control, Four Servo Compound Slides, 8-PositionTurret, Chip Conveyor with Cart, Interface for Static T2 Turret on BM Platform (Premier)

LNT42S-S4 with MITS 830 Control, Four Servo Compound Slides, 8-PositionTurret, Chip Conveyor with Cart, Interface for Static T2 Turret on BM Platform (Premier)

LNT42S-S4 with MITS 830 Control, Four Servo Compound Slides, 8-PositionTurret, Chip Conveyor with Cart, Interface for Static T2 Turret on BM Platform (Premier)

LNT42S-S4 with MITS 830 Control, Four Servo Compound Slides, 8-PositionTurret, Chip Conveyor with Cart, Interface for Static T2 Turret on BM Platform (Premier)

LNT42S-S4 with MITS 830 Control, Four Servo Compound Slides, 8-PositionTurret, Chip Conveyor with Cart, Interface for Static T2 Turret on BM Platform (Premier)

LNT42S-S4 with MITS 830 Control, Four Servo Compound Slides, 8-PositionTurret, Chip Conveyor with Cart, Interface for Static T2 Turret on BM Platform, T2 Electric Turret with Basic Tool Holders (Premier)

LNT42S-S4 with MITS 830 Control, Four Servo Compound Slides, 8-PositionTurret, Chip Conveyor with Cart, Interface for Static T2 Turret on BM Platform, T2 Electric Turret with Basic Tool Holders (Premier)

LNT42S-S4 with MITS 830 Control, Four Servo Compound Slides, 8-PositionTurret, Chip Conveyor with Cart, Interface for Static T2 Turret on BM Platform (Premier)

LNT42S-S4 with MITS 830 Control, Four Servo Compound Slides, 8-PositionTurret, Chip Conveyor with Cart, Interface for Static T2 Turret on BM Platform, T2 Electric Turret with Basic Tool Holders (Premier)

LNT42S-S4 with MITS 830 Control, Four Servo Compound Slides, 8-PositionTurret, Chip Conveyor with Cart, Interface for Static T2 Turret on BM Platform (Premier)

LNT51S-S4 with MITS 830 Control, Four Servo Compound Slides, 8-Position Turret, Hainbuch-styled Dead Length Collet on Main, Chip Conveyor with Cart, Interface for Static T2 Turret (Premier)

Demo / Lightly Used: LNT51S-S4 with MITS 830 Control, Four Servo Compound Slides, 8-Position Turret, Hainbuch-styled Dead Length Collet on Main, Chip Conveyor with Cart, Interface for Static T2 Turret, 8-Station Static Turret on BM Platform (AMT – Lorain, OH)

LNT51S-S4 with MITS 830 Control, Four Servo Compound Slides, 8-Position Turret, Hainbuch-styled Dead Length Collet on Main, Chip Conveyor with Cart, Interface for Static T2 Turret (Premier)

LNT51S-S4 with MITS 830 Control, Four Servo Compound Slides, 8-Position Turret, Hainbuch-styled Dead Length Collet on Main, Chip Conveyor with Cart, Interface for Static T2 Turret (Premier)

CTV750+C w/ Fanuc OiT-F PLUS Ctrl with 15″‘ Color LCD and Manual Guide i Conversational, 30HP + 2-speed ZF Gearbox, 15HP Live Tool Spindle Motor, 1000psi, 24 tool CAPTO C8 arm type ATC, 21″ Chuck, Auto Doors, Light Curtain

CTV900+C w/ Fanuc OiT-F PLUS Ctrl with 15″‘ Color LCD and Manual Guide i Conversational, 30HP + 2-speed ZF Gearbox, 15HP Live Tool Spindle Motor, 1000psi, 24 tool CAPTO C8 arm type ATC, 24″ Chuck, Auto Doors, Light Curtain

CTV900+C w/ Fanuc OiT-F PLUS Ctrl with 15″‘ Color LCD and Manual Guide i Conversational, 30HP + 2-speed ZF Gearbox, 15HP Live Tool Spindle Motor, 1000psi, 24 tool CAPTO C8 arm type ATC, 24″ Chuck, Auto Doors, Light Curtain

KM-450D with MITS M80A Ctrl, 12,000 RPM, 30 Tool ATC, Conveyor, 1000psi CTS

SA-20B with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Y Axis ID Tool Unit (5 station), MPG Program Check, MTA Tracer 20 Bar Feeder – PKG DEAL

SA-20B with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Y Axis ID Tool Unit (5 station), MPG Program Check, MTA Tracer 20 Bar Feeder – PKG DEAL

SA-20B with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Y Axis ID Tool Unit (5 station), MPG Program Check, MTA Tracer 20 Bar Feeder – PKG DEAL

SA-20B with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Y Axis ID Tool Unit (5 station), MPG Program Check, MTA Tracer 20 Bar Feeder – PKG DEAL

SA-20B with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Y Axis ID Tool Unit (5 station), MPG Program Check, MTA Tracer 20 Bar Feeder – PKG DEAL

SA-32B with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Y Axis ID Tool Unit (5 station), MPG Program Check, Tracer 32V 12′ Magazine Bar Feeder with Installation – PKG DEAL

SA-32B with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Y Axis ID Tool Unit (5 station), MPG Program Check, Tracer 32V 12′ Magazine Bar Feeder with Installation – PKG DEAL

SA-32B with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Y Axis ID Tool Unit (5 station), MPG Program Check, Tracer 32V 12′ Magazine Bar Feeder with Installation – PKG DEAL

SA-32B with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Y Axis ID Tool Unit (5 station), MPG Program Check, Tracer 32V 12′ Magazine Bar Feeder with Installation – PKG DEAL

SA-32PYII with Fanuc 0iT-F Plus Control, Back Tool Unit (4 Live, 4 Fixed), Long Shaft Discharging Unit, Y Axis ID Tool Unit (5 Station), MPG Program Check, Modular Cross Unit (3 spindle + 2 live), Modular Back Tool Unit (4 spindle), Housing to Convert to Non-Guide Bush Type; Tracer 32 Bar Feeder Pkg Deal

MITS M80A Ctrl with 10.4″ Color LCD, 15,000 DD Spindle with Cooler, CAT-40, Dual Screw Conveyors, 30 Tool Arm-type ATC, Full Enclosure, Prep for 1000psi CTS, Caterpillar Conveyor with Screw-type Conveyor in Bed

MITS M80A Ctrl with 10.4″ Color LCD, 15,000 DD Spindle with Cooler, CAT-40, Dual Screw Conveyors, 30 Tool Arm-type ATC, Full Enclosure, Prep for 1000psi CTS, Caterpillar Conveyor with Screw-type Conveyor in Bed

VTL-1000ATC w/ Fanuc 0iT-F Plus with 15′ LCD, 50HP, 16 Tool ATC, Chip Conveyor (48 Discharge Height), Standard Full Guarding, C-Axis & Live Tools-20HP w/2-speed Gearbox, 1000psi CTS, Auto Strong VIT-240 4-Jaw Hydraulic Chuck.

VTL-1600ATC/C with Fanuc 0iT-F Plus with 15 LCD, 60HP, 16 Tool ATC, 25HP Live Tool Spindle Motor, Auto Front Doors, 1000psi CTS

YV-1600ATC w/ Fanuc 0iT-F Plus, 60HP, 16 Tool ATC, Full Enclosure-Square guard, X-Axis Box Guideways, C- Axis and Live Tools – 20HP Live Tool Spindle Motor, 1000psi , Auto Tool Presetter

You Ji YV-1200ATC+C vertical turning lathe with all standard accessories. Includes standard guarding, chip conveyor with discharge height minimum 48? from floor, 16 tool ATC, Fanuc OiT-F Plus control package w/15″ LCD and all features and Specifications. Machine is to be painted our specified colors. 60HP, 2 speed gear box, Voltage is 220V, 60Hz. C axis and live spindle ? 20HP + 2 speed gearbox, 2400 RPM, Square guard enclosure with chip wash. 1000 psi CTS. New Sheet Metal

YV-1200ATC/C-Axis w/ Fanuc 0iT-F Plus with Manual Guide i & 15 Color LCD, 60HP, 2-speed Gearbox, 16 Tool ATC, 20HP Live Tool Spindle Motor, Square Guard Enclosure with Chip Wash, 1000psi CTS. New Style Sheet Metal

YouJi YV-320EL with Fanuc OiT-F PLUS Ctrl, 3000 RPM, 30HP P Type Spindle Motor, 2-speed Gearbox, 12 Hydraulic Chuck, 10-station Turret, Chip Conveyor, Standard Guarding, Chuck External Air Blow

YouJi YV-320EL with Fanuc OiT-F PLUS Ctrl, 3000 RPM, 30HP P Type Spindle Motor, 2-speed Gearbox, 12 Hydraulic Chuck, 10-station Turret, Chip Conveyor, Standard Guarding, Chuck External Air Blow

YouJi YV-320ER with Fanuc OiT-F PLUS Ctrl, 3000 RPM, 30HP P Type Spindle Motor, 2-speed Gearbox, 12 Hydraulic Chuck, 10-station Turret, Chip Conveyor, Standard Guarding, Chuck External Air Blow

YV-500EL with Fanuc 0iT-F Plus Ctrl, 10 Station Drum Turret, 18 Hydraulic Chuck, 30HP – 2 speed ZF Gearbox, Auto Doors, Pinch Restraint Systems, Linear Guideways

Showroom Demo: Quick-TECH i-42 ROBO CNC Single Spindle Turning Center, B-Axis, MITS M80A Ctrl, Built-in MITS 6-Axis Robot, Multi-tray Pallet Stacker, 6000 RPM, 15HP, 42mm Bar Capacity, 400psi Coolant System, Parts Conveyor, Parts Catcher, Chip Conveyor, Bar Feed Interface (AMT – Mason, OH)

Quick-TECH i-42 TWIN CNC 7-Axis Twin Spindle Turning Center,
MITS M80A Ctrl, 6000 RPM Main & Sub Spindle, 42mm Bar
Capacity / 15HP (Main Spindle), 7.5HP (Sub), 400psi Coolant System,
Parts Conveyor, Parts Catcher, Chip Conveyor, Bar Feed Interface
(AMT – Elgin, IL)

i-42 ULTIMATE CNC 10-Axis Twin Spindle Turning Center, MITS M830S Ctrl, 6000 RPM Main & Sub Spindle, 42mm Bar Capacity / 15HP (Main Spindle), 5HP (Sub), 400psi Coolant System, Parts Conveyor, Parts Catcher, Chip Conveyor, Bar Feed Interface, (2) 360 Degree B Axes with 12 Live Tools Each (24 Total)

i-42 ULTIMATE CNC 10-Axis Twin Spindle Turning Center, MITS M830S Ctrl, 6000 RPM Main & Sub Spindle, 42mm Bar Capacity / 15HP (Main Spindle), 5HP (Sub), 400psi Coolant System, Parts Conveyor, Parts Catcher, Chip Conveyor, Bar Feed Interface, (2) 360 Degree B Axes with 12 Live Tools Each (24 Total)

LND51D-S3 with MITS M830 Control, Three Servo Compound Slides, Full C-Axis Main & Sub, 8-Position All Live Tool Turret on Y Slide, Part Ejector & Air Nozzle in Sub Spindle, High Pressure (1,000 PSI) coolant pump, Lower Parts Catcher & Conveyor, Chip Conveyor, Hainbuch-style Dead Length Collet on Main

Quick-TECH S-32 ATM with MITS M830S Control, 6000 RPM Main &
Sub – 5″ 3-jaw Chuck, 5HP, 9 Total Axes, 2 Turning Spindles, B Axis
Milling Spindle with 24 Tool Auto Tool Change – 12,000 RPM, 6 Fixed
Sub Spindle Turning Tools for a Total Capacity of 30 Tools, Parts
Catcher & Parts Conveyor (AMT – Lorain, OH)

Demo: QuickTech S-32 ATM with MITS M830S Control, 6000RPM,
5HP, 9 Total Axes, 2 Turning Spindles, B Axis Milling Spindle with 24
Tool Auto Tool Change, 6 Fixed Sub Spindle Turning Tools for a Total
Capacity of 30 Tools (AMT – Mason, OH)

T8 COMPACT with Fanuc OiTF with 10.4 LCD, 20HP, 4000 RPM, 8 3-Jaw Chuck / 65mm Bar, Parts Catcher, Parts Conveyor, Chip Conveyor, Tailstock, Bar Feeder Interface

T8 HYBRID CNC 9-Axis Twin Spindle Turning Center, MITS M830S Control, 8” 3-Jaw Chuck on Main, 65mm Bar Capacity / 15HP (Main Spindle), 12 station BMT-55 Turret for Main Spindle, 6 3-Jaw Chuck on Sub, 30mm Bar Capacity / 7.5HP (Sub Spindle), 360 Degree B Axis with 12 Live Tools for Sub Spindle, 400psi Coolant System, Parts Conveyor, Parts Catcher, Chip Conveyor, Bar Feed Interface

T8 HYBRID CNC 9-Axis Twin Spindle Turning Center, MITS M830S Control, 8? 3-Jaw Chuck on Main, 65mm Bar Capacity / 15HP (Main Spindle), 12 station BMT-55 Turret for Main Spindle, 6 3-Jaw Chuck on Sub, 30mm Bar Capacity / 7.5HP (Sub Spindle), 360 Degree B Axis with 12 Live Tools for Sub Spindle, 400psi Coolant System, Parts Conveyor, Parts Catcher, Chip Conveyor, Bar Feed Interface (Premier)

T8 HYBRID CNC 9-Axis Twin Spindle Turning Center, MITS M830S Control, 8? 3-Jaw Chuck on Main, 65mm Bar Capacity / 15HP (Main Spindle), 12 station BMT-55 Turret for Main Spindle, 6 3-Jaw Chuck on Sub, 30mm Bar Capacity / 7.5HP (Sub Spindle), 360 Degree B Axis with 12 Live Tools for Sub Spindle, 400psi Coolant System, Parts Conveyor, Parts Catcher, Chip Conveyor, Bar Feed Interface (Premier)

Quick-TECH T8 MILL with MITS M80A, C-Axis & Live Tools – BMT-55 Turret,12 Tools, 20HP, 4000 RPM, 4000 RPM Live Tool, 8 3-Jaw Chuck / 65mm Bar, Parts Catcher, Parts Conveyor, Hydraulic Tailstock, Bar Feeder Interface

Quick-TECH T8 MILL with MITS M80A, C-Axis & Live Tools – BMT-55 Turret,12 Tools, 20HP, 4000 RPM, 4000 RPM Live Tool, 8 3-Jaw Chuck / 65mm Bar, Parts Catcher, Parts Conveyor, Hydraulic Tailstock, Bar Feeder Interface

T8 TWIN-Y with Fanuc OiTF with 10.4 LCD and Manual Guide i, Y Axis, 20HP, 4000 RPM Main and Sub, 4000 RPM Live, 8 3-Jaw Chuck / 65mm Bar, Parts Catcher, Parts Conveyor, Bar Feeder Interface (Premier)

T8 TWIN-Y with Mitsubishi M80 with 10.4 LCD and Manual Guide i, Y Axis, 20HP, 4000 RPM Main and Sub, 4000 RPM Live, 8 3-Jaw Chuck / 65mm Bar, Parts Catcher, Parts Conveyor, Bar Feeder Interface

T8 TWIN-Y with Mitsubishi M80 with 10.4 LCD and Manual Guide i, Y Axis, 20HP, 4000 RPM Main and Sub, 4000 RPM Live, 8 3-Jaw Chuck / 65mm Bar, Parts Catcher, Parts Conveyor, Bar Feeder Interface

VMT1000+Y with Fanuc 31iTB with 10.4″ Color LCD and Manual Guide i, 24 Tool BT-50 Arm-type ATC and Live Tool Spindle, 20HP Live Tool Spindle Motor – 3500 RPM, 24″ Hydraulic Chuck, B-Axis Head: 5 degree index – 0-90 degrees, XYZ Axis Linear Scale, Chip Flush System, 1000psi CTS, (2) Boring Bar, (2) Turning, (2) Facing, (1) Y-Axis RH, (1) Y-Axis LH (AMT – Lorain, OH)

SA-12B with Fanuc 0iT-F Plus Ctrl, Y Axis 5 Station ID Tool Unit, MPG Program Check, Back Tool Unit (2 live, 2 fixed), MiniBar Bar Feeder – PKG DEAL

SA-12B with Fanuc 0iT-F Plus Ctrl, Y Axis 5 Station ID Tool Unit, MPG Program Check, Back Tool Unit (2 live, 2 fixed), MiniBar Bar Feeder – PKG DEAL

SA-20B with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Y Axis ID Tool Unit (5 station), MPG Program Check, MTA Tracer 20 Bar Feeder – PKG DEAL

SA-20B with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Y Axis ID Tool Unit (5 station), MPG Program Check, MTA Tracer 20 Bar Feeder – PKG DEAL (AMT – Mason, OH)

SA-20B with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Y Axis ID Tool Unit (5 station), MPG Program Check, MTA Tracer 20 Bar Feeder – PKG DEAL (AMT – Mason, OH)

SA-20B with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Y Axis ID Tool Unit (5 station), MPG Program Check, MTA Tracer 20 Bar Feeder – PKG DEAL (AMT – Mason, OH)

SA-20B with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Y Axis ID Tool Unit (5 station), MPG Program Check, MTA Tracer 20 Bar Feeder – PKG DEAL (Premier)

SA-20B with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Y Axis ID Tool Unit (5 station), MPG Program Check, MTA Tracer 20 Bar Feeder – PKG DEAL

SA-20PII with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Long Shaft Discharging Unit, Y Axis ID Tool Unit (5 station), MPG Program Check, Tracer 20 Bar Feeder Pkg Deal

SA-20PII with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Long Shaft Discharging Unit, Y Axis ID Tool Unit (5 station), MPG Program Check, Tracer 20 Bar Feeder Pkg Deal

SA-20PYII with Fanuc 0iT-F Plus Control, Modular Cross Unit (3 spindle) + 2 Live; Back Tool Unit (4 live, 4 fixed), Modular Back Tool Unit (4 spindle); Cut-off Detector, Long Shaft Discharging Unit, Y Axis ID Tool Unit (5 station), MPG Program Check; Housing to Convert to Non-Guide Bush Type; Tracer 20 Bar Feeder Pkg Deal (Premier)

SA-20PYII with Fanuc 0iT-F Plus Control, Modular Cross Unit (3 spindle) + 2 Live; Back Tool Unit (4 live, 4 fixed), Modular Back Tool Unit (4 spindle); Cut-off Detector, Long Shaft Discharging Unit, Y Axis ID Tool Unit (5 station), MPG Program Check; Housing to Convert to Non-Guide Bush Type; Tracer 20 Bar Feeder Pkg Deal (Premier)

SA-32B with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Y Axis ID Tool Unit (5 station), MPG Program Check, Tracer 32V 12′ Magazine Bar Feeder with Installation – PKG DEAL

SA-32B with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Y Axis ID Tool Unit (5 station), MPG Program Check, Tracer 32V 12′ Magazine Bar Feeder with Installation – PKG DEAL

SA-32B with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Y Axis ID Tool Unit (5 station), MPG Program Check, Tracer 32V 12′ Magazine Bar Feeder with Installation – PKG DEAL (Premier)

SA-32B with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Y Axis ID Tool Unit (5 station), MPG Program Check, Tracer 32V 12′ Magazine Bar Feeder with Installation – PKG DEAL

SA-32B with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Y Axis ID Tool Unit (5 station), MPG Program Check, Tracer 32V 12′ Magazine Bar Feeder with Installation – PKG DEAL (Premier)

SA-32B with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Y Axis ID Tool Unit (5 station), MPG Program Check, Tracer 32V 12′ Magazine Bar Feeder with Installation – PKG DEAL (Premier)

SA-32B with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Y Axis ID Tool Unit (5 station), MPG Program Check, Tracer 32V 12′ Magazine Bar Feeder with Installation – PKG DEAL (Premier)

SA-32B with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Y Axis ID Tool Unit (5 station), MPG Program Check, Tracer 32V 12′ Magazine Bar Feeder with Installation – PKG DEAL (Premier)

SA-32PII with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Long Shaft Discharging Unit, Y Axis ID Tool Unit (5 station), MPG Program Check; Tracer 32 Bar Feeder Pkg Deal

SA-32PII with Fanuc 0iT-F Plus Control, Back Tool Unit (2 live, 2 fixed), Long Shaft Discharging Unit, Y Axis ID Tool Unit (5 station), MPG Program Check; Tracer 32 Bar Feeder Pkg Deal

SA-32XIII with Fanuc 31iT-B Control, Back Tool Unit (4 live, 4 fixed), Front End Face Live Tool Unit (2 Live); Long Shaft Discharging Unit, (4) Additional Modular Live Spindles; MPG Program Check; Tracer 32 Bar Feeder Pkg Deal (AMT – Mason, OH)

Quick-TECH T6 COMPACT with MITS M80A Control, 12 Station
Turret, 15HP, 6000 RPM, 6″ 3-Jaw Chuck / 42mm Bar, Parts Catcher,
Parts Conveyor, Tailstock, Bar Feeder Interface (Premier)

Heidenhain iTNC-640 – full 5-axis, 15,000 RPM Spindle with Cooler, CAT-40 (big plus), 40 Tool ATC, 39HP Spindle Motor, Full Enclosure, Caterpillar Conveyor, 630mm Direct Drive Torque Motor Tilt / Rotary Table with Encoders, 3-Axis Linear Scales, 1000psi CTS (IAMT – Lorain, OH)

Fanuc OiTF Ctrl, 4800 RPM, 12-station Turret, Chip Conveyor, Gantry Loader, 14 Station Work Stocker, 85mm Spindle with 8″ Chuck, Manual Tool Setter, Auto Power Off, Disk Type Oil Skimmer (Premier)

Used: Tongtai HS-22M with Fanuc OiTD Ctrl, 6000 RPM with 0.001 degree C Axis Spindle Orientation; 12-station VDI Turret, Chip Conveyor, Gantry Loader, 14 Station Work Stocker; (2) Axial Tool Holders, (2) Radial Tool Holders, 1000 Cutting Hours (AMT – Lorain, OH)

Fanuc OiT-F with 10.4″ Color LCD, (2) 12 Station Servo Turrets, (2) 8″ 3-Jaw Chucks, Dual Gantry Loaders with 14 Station Work Stockers, Chip Conveyor, Tongtai Integrated Monitoring System (AMT – Elgin., IL)

DEMO: New-Condition Q5 + Loader with Fanuc OiTD Control with 8.4″ Color LCD, 6,000 RPM, 7.5HP, 5″ Chuck, Gantry Loader with 8 Station Rotary Pallet Type Work Stocker, Part Exit Conveyor, Caterpillar Chip Conveyor (AMT – Lorain, OH)

Fanuc OiTD, 3500 RPM, 40HP, 10″ Hydraulic Chuck, 12 Station Turret, 16-Pallet Parts Stocker, Manual Tool Presetter (AMT – Lorain, OH)

Fanuc 31iTB Ctrl, 3 Turrets, 2 Spindles, 20HP Main Spindle – 4500RPM, 25HP Sub-Spindle – 6000RPM, Standard Holders, Bar Feed Interface, Parts Catcher on Sub-Spindle, Parts Conveyor (Premier)

2010: Tongtai TNL-100TLSB with Fanuc OiTD with Manual Guide i, 4500 RPM, 20HP, 12 Station BMT-type Turret, 8″ Chuck, Chip Conveyor, CS Axis, Parts Conveyor, Parts Catcher on Sub-spindle, Tool Presetter, Bar Feeder, (2) ea. Axia & Radial Toolholders (F.O.B. Mason, OH)

YouJi AH-06 Turning Center with Fanuc OiTF Ctrl with 10.4″ LCD and Manual Guide i, , 1200 RPM, 60HP, 12 Station Turret, 3-speed Geared Headstock, 24″ Chuck, 6″ Bar Capacity, Caterpillar Conveyor, Oil Skimmer, A/C for Electrical Cabinet, 40″ Bed

YouJi AH-06 Turning Center with Fanuc OiTF Ctrl with 10.4″ LCD and Manual
Guide i, 1200 RPM, 60HP, 12 Station Turret, 3-speed Geared Headstock, 24″
Chuck, 6″ Bar Capacity, Caterpillar Conveyor, Oil Skimmer, A/C for Electrical
Cabinet, 80″ Bed

MT-415/2000 Slant Bed Turning Center w/ Fanuc 0iT-F Plus Control with Manual Guidance i, 2500 RPM, 12 Station Turret, 2-speed Gearbox, 15 Chuck, Caterpillar Conveyor, Programmable Tailstock (Premier)

2014: Tongtai TMV-510T/APC with Fanuc OiMD Ctrl with 8.4′ Color LCD, Fanuc AICC-II, 12,000 RPM, 5HP, 20 Tool ATC, BBT-30, Spindle Cooler, Screw & Caterpillar Type Conveyors, 300psi CTS, (2) Tsudakoma RZ-161 (6) Indexers & Rotary Tailstocks (F.O.B. – AMT – Lorain, OH)

VLS-2000ATC/C-Axis with Fanuc OiTF Ctrl with 10.4 Color LCD and MGI, 16 Tool ATC, 20HP + 2-speed Gearbox on Live Tools, Cs Axis with Dual Spindle Motors (2 x 50HP), Auto Tool Presetter, 1000psi

YV-1200ATC w/ Fanuc 0iT-F Plus, 60HP, 2-speed Gearbox, 12 Tool ATC, Full Enclosure Square Guard with Chip Wash

YouJi YV-320ER with Fanuc OiT-F PLUS Ctrl, 3000 RPM, 30HP P Type Spindle Motor, 2-speed Gearbox, 12 Hydraulic Chuck, 10-station Turret, Chip Conveyor, Standard Guarding, Chuck External Air Blow

YV-500EL with Fanuc 0iT-F Plus Ctrl, 10 Station Drum Turret, 18 Hydraulic Chuck, 30HP – 2 speed ZF Gearbox, Auto Doors, Pinch Restraint Systems, Linear Guideways

YV-500EL with Fanuc 0iT-F Plus Ctrl, 10 Station Drum Turret, 18 Hydraulic Chuck, 30HP – 2 speed ZF Gearbox, Auto Doors, Pinch Restraint Systems, Linear Guideways

YV-500ER with Fanuc 0iT-F Plus Ctrl, 10 Station Drum Turret, 18 Hydraulic Chuck, 30HP – 2 speed ZF Gearbox, Auto Doors, Pinch Restraint Systems, Linear Guideways

YV-500ER with Fanuc 0iT-F Plus Ctrl, 10 Station Drum Turret, 18 Hydraulic Chuck, 30HP – 2 speed ZF Gearbox, Auto Doors, Pinch Restraint Systems, Linear Guideways (Premier)

YV-600ATC+C+Y with Fanuc OiTF Ctrl with 10.4″ Color LCD and MGI Conversational, 12 Station ATC, 30HP “P” Motor + 2-speed ZF Gearbox – 15HP Live Tool Spindle Motor, XYZ Axis Linear Scales, 1000psi CTS (Premier – Elgin, IL)